Pressure compensation dripper, as the name suggests, is an
Irrigation Device that can automatically adjust the amount of water produced according to changes in water pressure. In the irrigation operation, the normal water pressure should be a long-term stable value, but the actual situation often occurs that the pressure is too high or too low, at this time, if the use of ordinary dripper, will lead to fluctuations in water output, and the use of pressure compensation dripper can avoid this situation, to achieve a stable irrigation effect.
Let's learn more about how to use the pressure compensation dropper properly.
1. Preparation before installation
1. Choose the right pressure compensation dripper. The pressure compensation dropper produced by different brands has different range of adjustment irrigation. Therefore, when choosing a pressure compensation dropper, you should select parameters such as water yield, water pressure and sprinkler type according to your irrigation requirements and available water sources. In general, some large agricultural droppers will have a wider adjustment range and more reliable quality assurance.
2. Clean the irrigation system. Before installation, the irrigation system should be cleaned to remove sediment and impurities that may exist inside the pipe, so as not to affect the normal operation of the pressure compensation dropper.
3. Install the filter device. The pressure compensation dropper has a high requirement for the cleanliness of the water outlet, because fine impurities and particles can affect the water output and the service life of the nozzle. Therefore, at the time of installation, filters or other forms of filtration equipment should be installed to ensure the purity of irrigation water.
Second, installation steps
1. Install the pressure compensation dripper in the external irrigation line with a regulating valve. For the installation of internal pipes, the pipes need to be modified or replaced.
2. Ensure that all connections are tight and free of water leakage.
How to use the pressure compensation dropper correctly?
Third, the adjustment method
1. Turn off the faucet in the irrigation system, slowly open the main valve, and wait ten seconds before turning on the faucet. If the nozzle is weak or does not water, the adjustment and filter of the nozzle should be checked in time to ensure normal use.
2. In the irrigation operation, the water yield and water range of the pressure compensation dropper can be manually adjusted according to the need. If it is a spraying irrigation operation, it is necessary to adjust the spray range and horizontal Angle of the nozzle; If it is a drip irrigation operation, it is necessary to adjust the water yield and outlet spacing of the drip head.
3. When adjusting the water output, it can be achieved by adjusting the water pressure. When the pressure is high, the water yield is relatively large. When the pressure is low, the water yield is correspondingly small. However, it should be noted that too low water pressure can not meet the irrigation requirements, and too high water pressure will lead to increased water consumption, more energy and water bills.
In short, the pressure compensation dripper is a more efficient, stable and reliable irrigation device that can help farmers, landscapers and other people who need irrigation to reduce the difficulty and improve the efficiency of their work, while ensuring the health, maturity and harvest of their crops. All users need to strictly follow the above steps in the use process to ensure the normal and long-term use of the pressure compensation dropper.
