How to solve the problem of pressure compensation dropper leakage?

Pressure compensating dropper is an essential part of irrigation system. They ensure that each plant gets enough water by regulating the flow and pressure of water. However, in practice, we often encounter the problem of leakage of pressure compensation drops, which not only leads to waste of water resources, but also may affect the irrigation effect.

So, how to solve the problem of pressure compensation dripping head leakage? We can start from the following aspects.

1. Check whether the dripper is correctly installed

First make sure that the dropper is properly installed on the water pipe and in the correct position. If the dropper is not properly installed, such as the locking ring is not fully locked or the bite is not properly paired, it can cause the dropper to leak. Therefore, we need to carefully check whether the dripper installation is correct, if it is not correct, we need to reinstall or replace the dripper.

2. Check whether the sealing ring is complete

The sealing ring of the dropper acts as a connection between the dropper and the water pipe, preventing water from leaking between the dropper and the water pipe. If the seal ring is worn or deformed, it will cause the drip head to leak. So we need to check whether the seal ring is complete, no wear or deformation, if there is a problem, need to replace the seal ring.

3. Check whether the filter is clean

The dropper usually comes with a screen that filters out dirt and impurities and prevents clogging of the dropper. However, if the filter is dirty, it will cause the drip head to leak. So we need to clean the filter regularly to ensure that it is unobstructed.

4. Adjust water flow and pressure

If the water flow or pressure is too high, it will cause the drip head to leak. So we need to adjust the water flow and pressure to make it within the allowable range. We can adjust the water flow by increasing or decreasing the number of drops, and control the water pressure by adjusting the water valve.

5. Check whether the pipe is damaged

Drip leaks can also be caused by damaged or broken irrigation pipes. Therefore, we need to check whether there is damage to the irrigation pipeline. If there is damage, the irrigation pipeline needs to be repaired or replaced immediately.

In short, the solution to the problem of pressure compensation drip head leakage requires careful inspection and maintenance. Only by ensuring that every detail is maintained can the irrigation system be more effective.